+86-592-3178196

Common Sense Of Daily Maintenance Of UV Lamp Power Supply

May 11, 2021

In the process of using the UV lamp power supply, the time is too long to avoid the need to maintain it, so that it can play the best product performance. The following UV lamp power supply manufacturers introduce you to the common sense of daily maintenance.

First of all, every operator responsible for maintenance must be familiar with the basic working principles and functional characteristics of the UV lamp power supply, and have basic knowledge of electrician operation. Before the inspection and maintenance of the UV lamp power supply, the total power supply of the equipment must be cut off; and the UV lamp power supply Chang lamp must be completely extinguished.

Before powering on the UV lamp power supply, check the temperature and humidity of the surrounding environment. Too high temperature will cause the UV lamp power supply to overheat and alarm, and the serious will directly cause damage to the UV lamp power supply and the circuit short-circuit; too much air will cause the UV lamp power supply Direct internal short circuit. When the UV lamp power supply is running, pay attention to whether the cooling system is normal, such as: whether the air duct exhaust is smooth, and whether the fan has abnormal sound.

Generally, the UV lamp power supply with relatively high protection level, such as: the UV lamp power supply above IP20 can be installed directly, and the UV lamp power supply below IP20 should generally be installed in a cabinet, so how the heat dissipation effect of the inverter cabinet will directly affect the normal operation of the UV lamp power supply , The exhaust system of the UV lamp power supply, such as whether the fan rotates smoothly, whether there is dust and blockages in the air inlet, are places that cannot be ignored in our daily inspections. Whether the motor reactor, UV lamp power supply, etc. are overheated or smelly; whether the UV lamp power supply and motor have abnormal noise; whether the current display on the UV lamp power supply panel is too large or the current change range is too large, and whether the output UVW three-phase voltage and current are balanced.


Send Inquiry